Tilt Deck (Heavy Duty) - 2017 Behnke


This trailer fits some very specific needs. If you need to move a fork lift, scissor lift, or low clearance equipment this is a trailer for you. This trailer lowers flat to the ground to allow driving the piece of the equipment into the trailer then being raised off the ground. Has a 14,000 pound GVWR and a 9500 payload. 

This trailer measures 76 inches wide on the inside of box. 14 foot of bed plus an 18 inch beaver tail. The box is 24 inches high and secures your equipment well. 8 d rings welded to the trailer, 4 per side and centered on the front of the trailer. The axles are a tubeless design with Timbren style suspension. These work like a spring that it applies the correct amount of pressure needed to ride well empty and loaded. Easy lube spindles. 10 ply radial tires on 16 inch white steel modular wheels. 12 inch electric drum brakes on all 4 tires. 12,000 pound drop leg jack. The B and B paint process really stands out from the competition. First they acid wash the trailer, then primer the trailer with a zinc based paint, followed by the colored powder coat. 4 mil. thick paint standard. Full L E D light package with sealed wire harness. Electric over hydraulic pump with gravity down feature to maintain battery life. 110 volt trickle charger included in the price. The Demco 2-5/16 coupler is arguably the best coupler on the market. 

Backed by a 5 year structural warranty.

Financing available at www.sheffieldfinacial.com 

We make our selves available 7 days a week from 8 am to 8 pm by email and phone. These are not our office hours. 

Please call before making the trip. 507-764-2299

Primary Information
Stock #HDT1414E
ManufacturerBehnke Enterprises Inc.
TypeTilt Deck (Heavy Duty)
Length14' 0"
Width6' 4"
Height2' 0"
LocationSherburn, Minnesota
Primary Information
HitchBumper Pull
Floor TypeSteel
Rear OpeningRamp
Rear Opening Width6' 4"
GVWR14,000 lbs

Contact Seller

You May Also Like