Livestock Trailer - 2019 EBY Ruff Neck 8' X 32' 25K

8LV001062 32' RUFFNECK

$37,000

  • 2019 EBY 32' RUFFNECK STOCK TRAILER 
  • NEW 2019 EBY RUFF NECK 32' X 8' X 6'6"  2 10,000 LB. Dexter Electric Brake Axles, 17.5" H.D. Steel Wheels, 16 Ply Tires,
  • Perm gate with sliding pass through
  • No threshold front rolling gate with 16' of rolling gate rail
  • Outside tie rail at bottom
  • 4 Corral loops at rear corners
  • 2 Sets of tail lights, 5 marker lights each side top rail, 3 interior lights.
  • STOCK # 2029418
  • BLOW OUT PRICE!

STANDARD SPECIFICATIONS …

Available Dimensions:

Floor Length:  24’6”, 26’, 27’6”, 29’, 30’6”, 32’, 35’
Outside Width:  7’3”, 8’, 8’6”
Inside Height:  6’6”, 7’, 7’6”

Running Gear:

GVWR: 19,000 lbs – 8,000 lb axles.  25,000 lbs – (3) 8,000lb axles.  25,000lbs – 10,000 lb axles.
Axles:  (2) 8,000# rubber ride (greased packed bearings), 102” wide on 24’6” and 26’ length.  (2) 10,000# rubber ride ( greased packed bearings), 102” wide on 27’6” and longer lengths.
Wheels:  17.5 x 6.75 heavy duty steel wheel, 8-lug.
Tires:  (4) 9R17.5 steel belted radials, load range G on 8,000# axles.  (4) 235/75R17.5 steel belted radials, load range H on 10,000# axles.
Brakes:  12-1/4” x 3-3/8” electric on 8,000# axles.  12-1/4” x 4” electric on 10,000# axles.
Safety Equip.:  Two chains and electronic breakaway kit.
Landing Gear:  Single drop leg, two speed, roadside crank with crank bushing.
Bogie:  Extruded aluminum bogie rails.  See engineered drawing for location.

Nose Construction:

Nose Assembly:  9º tapered nose with .080 aluminum smooth sheet sides and front, with aerodynamic Eby cast aluminum corner caps with extruded front corner posts.
Posts:  4-1/2” extruded aluminum hat shaped posts.
Bottom Rails:  10-1/2” extruded aluminum.
Crossmembers:  5” fabricated aluminum on 19” centers
Floor:  1/8” aluminum smooth sheet.
Upper Coupler:  5/16” x 5” x 7” tubular steel.
Lower Coupler:  2-5/16” ball coupler (30,000# ball rating) with steel hitch post section and aluminum front gusset, adjustable height 28” – 36-1/2” from ground to top of ball.

Box Construction:

Sheet:  .075 5454 H34 aluminum smooth sheet, riveted to side posts with ¼” rivets on 4” centers.  Punched air openings per chosen pattern, vertically ribbed.
Posts:  Extruded aluminum, 1” x 4-1/2” hat shaped side posts with integral closure track, spaced on 18? centers.
Bottom Rails:  7” tall extruded aluminum.
Top Rails:  6” extruded aluminum.
Crossmembers:  3” extruded aluminum I-beams on 12” centers.
Floor:  .115 6061 T6 aluminum diamond plate with (4) 1” high ridges, longitudinally on 19” centers.
Side Door:  28-1/2” wide, curb side.
Rear Frame:  3” x 5” extruded aluminum with Eby cast aluminum corner caps.
Rear Door:  Full swing with (3) 4” extruded aluminum offset hinges for extended swing radius.  Hinges are mechanically fastened and welded to rear frame.  Exterior sliding door on roadside with polyurethane rollers at the top and UHMW wear pads at the threshold.

Roof Assembly:

Sheet: One-piece .040 aluminum, screwed  to top rail on 4” centers.
Bows: Flat, hat shaped 1-1/2” x 4” extruded aluminum on 24” centers.

Partitions:

Std. Partition: Extruded aluminum tube and punched sheet construction with (2) horizontal stiffener rails and outside release slam latch.  Extruded aluminum pipe hinge with nylon bushing mounted curbside. Partition located at front of wheel wells.
Nose Partition: Bottom hinged, punched sheet construction with (2) self-catching rotary latches.

Lights & Wiring:

Lights:   12-volt D.O.T. approved, LED. With chrome bezels on marker lights.
Wiring:  A.T.A. color coded, sealed wiring harness.
Rear Lights:  QuadraLight, turn-tail-stop-back up, LED.  One light each side.
Inside Lights:  Two LED, with external rear water resistant switch.

Miscellaneous:

Tire Carrier:  Aluminum, mounted on exterior drop sheet.
Wheel Pockets:  Combination of 1/8” formed aluminum smooth sheet and heavy duty extruded axle rail.
Fenders:  Extruded rolled aluminum.
Bumpers:  Full width 3” molded rubber.
Skid Plates:  (3) 3/16” formed aluminum.
Paint:  Steel parts painted silver.
Conspicuity Tape:  Meets all US and Canadian regulations.

Popular options 

  • 7' Inside height
  • Rolling gate
  • 1/2 sliding or hinged pass through doors in interior gates
  • Spare wheel and tire
  • Plexiglas closures
  • Aluminum closures
  • Belly vents
  • Nose Vents

Ruff Neck trailers also are available with convenient option packages

  • Combo Package
    • Converts existing 4' of trailer into tack room which includes a permanent straight wall, sealed camper door, windows in the nose, and an inside light with seperate switch.
  • Trophy Package
    • Includes Black Panels on side of nose, Stainless Steel front corners, polished aluminum corner caps, inside and outside tie rail, extra light package, 1/2 sliding pass through door in center divider
  • Trophy Plus Package
    • Trophy package with a rolling gate in lieu of the std permanent gate
  • Final Drive Package
    • Trophy package with 48? wide drop ramp curbside and escape door roadside, Rolling gate in addition to std. gate, loading light over ramp.
IN STOCK SPECIAL
Primary Information
Stock #2029418
Year2019
ManufacturerM.H. Eby
BrandEBY
ModelRuff Neck
Floorplan8' X 32' 25K
TypeLivestock Trailer
Length32' 0"
Width8' 0"
Height6' 6"
Quantity1
LocationHalsey, Oregon
Price$39,995.00
Sale Price$37,000.00
Primary Information
ConditionNew
Ext. ColorAluminum
ConstructionAluminum
Axles2
HitchGooseneck
Floor TypeAluminum
# of Side Doors1
Rear OpeningSwing
Load TypeStraight
GVWR25,000 lbs
Dry Weight5,950 lbs
Payload Capacity19,050 lbs

Contact Seller

You May Also Like