2019 Diamond C FMAX212 40

Diamond C FMAX212 40' 16" Engineered I-Beam, 35' + 5', AIR RIDE w/ Front Lift Axle, -AIR PUMP NEEDS REPLACED 12,000lb Dexter Axles w/ 60" Spread, Hydraulic Disc Brakes, 17.5 Tires, Max Ramps, Winch Plate in Neck, Ratchet Rail, Under body Tool Box, Matching Spare Tire Mounted, The I-Beams: We engineer the beams, optimize them, and build them for each trailer confguration just like semi trailer manufacturers have been for decades. Our I-beam frames are taller, stronger, and lighter than your neighbor's. 14-18" tall. Standard steel bends at 36 ksi. Our beams are built using steel rated at 50 ksi minimum. The Camber: The deck and frame have a slight camber when not loaded. When loaded, it flexes as necessary to level but never sags like traditional goosenecks. The Neck: Curves distribute force throughout the neck so there is no concentration of stress in corners like traditional Goosenecks The Steps The retractable front deck steps solve the common issue of traditional front deck steps being bent in low clearance situations. The mid-deck side turn signal step makes for easy access when equipment is loaded. MAX Ramps: 44" wide ramps for MAX versatility. 50 ksi steel ramp frames X 4 frames per ramp for MAX strength. HD Spring loaded for easy lifting from deck and from ground MAX Hinges: The two point ramp hinges are concealed and protected inside of the ramp bodies, not exposed on the bumper like most. Our hinges transfer the force of the load into the knees of the ramps to prevent the back of the trailer from sagging and the ramps from kicking up when loading heavy equipment. For safe, stable loading